Thursday, 14 December 2017

Adjusting the KiwiSDR display for optimum spectrum presentation

New users of the KiwiSDR often comment that the spectrum display seems noisy. It is necessary to change the display settings to get optimum results once you have set your frequency and display bandwidth.

Suggested steps:

1) Select 'Spectrum' if you have not already done so.

2) On the upper display, note the noise floor.

3) Adjust 'WF min' until the noise floor just disappears below the display.

4) Adjust 'WF max' to raise the peaks of the visible signals.

A KiwiSDR session optimised for good presentation

No comments:

Post a Comment